If the power trips whenever the kettle and heater run together, or you still have rewireable fuses, the switchboard at your Leopold place is overdue.
An upgrade is not just a new box on the wall. We test the circuits, fix what the old board was hiding, label everything properly and certify the work.
Most Leopold switchboard upgrades are done in a day, with the power off for part of it. We give you the window up front so you can plan around it.
Replacing old fuses with RCDs and circuit breakers so a fault cuts the power instead of going through someone.
Overloaded circuits, shared neutrals and undersized boards are the usual causes. We find it rather than just reset it.
Adding capacity for air conditioning, an EV charger, a granny flat or a renovation at your Leopold property.
We replace the old board with a modern enclosure, fit RCDs and breakers, label every circuit and test the lot. You get a certificate of electrical safety when we are finished, which matters if you ever sell or insure the place.
Sometimes the board is the symptom, not the problem. If the wiring behind it is perished or the earthing is not up to scratch, we will tell you honestly rather than bolting a shiny new board onto old faults.
Other services we offer in Leopold:
Electrician Leopold · Solar Installation Leopold · Ceiling Fan Installation Leopold · EV Charger Installation Leopold
Switchboard work is the kind of job where cutting corners does not show up until something goes badly wrong. We do not cut them.
We cover Leopold and the suburbs around it, so travel time is not padding out your invoice.
Send us a photo of your existing board and we can usually give you a ballpark before we even visit. Quotes are free and fixed.
We also cover Switchboard Upgrades Ocean Grove · Switchboard Upgrades Barwon Heads · Switchboard Upgrades Lara · Switchboard Upgrades Norlane · Switchboard Upgrades Torquay. Every suburb is listed on our service areas page, or see our full switchboard upgrades page and the Smart Power Electrical homepage.
